玻璃制品兼顧美觀與實用，既能夠憑借晶瑩剔透的外表惹人喜愛，又能夠充分利用其堅硬耐用的物理性能。那在生活中我們經常會用到各類玻璃制品，例如玻璃門等。那么您知道更換玻璃門拉手的方法與安裝步驟是怎樣的嗎？下面濟南玻璃門廠家為您講解：

Glass products are both beautiful and practical. They can not only attract people with their crystal clear appearance, but also make full use of their hard and durable physical properties. We often use all kinds of glass products in our life, such as glass doors. Do you know how to replace the glass door handle and how to install it? Now Jinan glass door manufacturer will explain to you:

一、更換玻璃門拉手的方法

1、 Method of replacing glass door handle

1、全玻璃門扇上玻璃門拉手孔洞，一般在裁割玻璃時加工完成，玻璃門拉手連接部分插入洞口時不能過緊，應略有松動；如插入過松，可在插入部分裹上軟質膠帶，

1. The glass door handle hole on the full glass door leaf is generally processed when cutting the glass. The connecting part of the glass door handle should not be too tight when inserting into the hole, but should be slightly loose; If the insertion is too loose, wrap soft adhesive tape on the insertion part,

2、安裝前在玻璃門拉手插入玻璃的部分涂少許玻璃膠，拉手組裝時，其根部與玻璃靠緊密后再按緊固定螺釘，以保證拉手沒有松動現象，

2. Before installation, apply a little glass glue on the part where the glass door handle is inserted into the glass. When the handle is assembled, its root is close to the glass, and then press the fixing screw to ensure that the handle is not loose,

3、如果不是玻璃門鋼化玻璃的話，用10mm的玻璃鉆頭，量出玻璃門拉手的孔距(到)，在玻璃門上標記好，澆水打孔，安裝時先從外面上，在里面擰拉手的長螺絲，別把拉手的螺絲留外面了，那樣能夠從外面把玻璃門拉手卸掉的，

3. If it is not tempered glass of glass door, use a 10mm glass drill bit to measure the hole spacing (to) of the glass door handle, mark it on the glass door, water it and punch it. When installing, first screw the long screw of the handle from the outside, and then screw the handle from the inside. Don't leave the handle screw outside, so that the glass door handle can be removed from the outside,

二、玻璃門拉手安裝步驟

2、 Installation steps of glass door handle

先需要準備的工具:螺絲刀、螺絲、筆(做記號用)

Tools to be prepared first: screwdriver, screw, pen (for marking)

一:做記號

1： Mark

先把玻璃門平放，在預先要安裝玻璃門拉手(希比信)的地方做好記號，用電轉裝上對應規格的金剛磚頭兌水打眼，此時得注意防護，以免玻璃破裂，如果不是鋼化玻璃的話，就用10mm的玻璃鉆頭，量出拉手的孔距[中心到中心，在玻璃上標記好，澆水打孔，

First place the glass door flat, mark the place where the glass door handle (Hibison) is to be installed in advance, use electricity to install the corresponding specification of diamond brick and water to drill holes. At this time, pay attention to protection to avoid glass breakage. If it is not tempered glass, use a 10mm glass drill to measure the hole distance of the handle [center to center, mark on the glass, water and drill holes,

二:打玻璃膠

2： Apply glass glue

接著在拉手插入玻璃的部分涂少許玻璃膠，拉手組裝時，其根部與玻璃靠緊密后再按緊固定螺釘，以保證拉手沒有松動現象，

Then apply a little glass glue on the part where the handle is inserted into the glass. When the handle is assembled, its root is close to the glass and then press the fixing screw to ensure that the handle is not loose,

三:擰螺絲

3： Screw

較后安裝拉手時先從外面上，在里面擰拉手的長螺絲，別把拉手的螺絲留外面了，那樣能夠從外面把拉手卸掉的，拉手連接部分插入洞口時不能過緊，應略有松動；如插入過松，可在插入部分裹上軟質膠帶

When installing the handle later, first screw the long screw of the handle from the outside, and do not leave the screw of the handle outside. If the handle can be removed from the outside, the connecting part of the handle should not be too tight when inserted into the hole, but should be slightly loose; If the insertion is too loose, wrap soft adhesive tape on the insertion part

玻璃門硬度可靠，容易清潔，款式大方，透明透光，不影響光線的照耀，現在不少的門市店面都是使用玻璃門，所以在注重玻璃門拉手質量同時，玻璃門拉手的安裝的好壞會直接影響其美觀，所以這方面還是要認真了解的，更多事項就來我們網站http://www.taomeishi.com.cn咨詢吧！

The glass door is reliable in hardness, easy to clean, generous in style, transparent and transparent, and does not affect the light. Now many stores use glass doors, so while paying attention to the quality of the glass door handle, the installation of the glass door handle will directly affect its beauty, so we need to understand this aspect carefully, and more matters will come to our website http://www.taomeishi.com.cn Ask!